Who Does Powder Coating Near Me?
If you’re searching ‘who does powder coating near me’, you’re probably staring at a set of car rims that lost their shine, or maybe a rusty railing, or that patio furniture that’s been through one too many winters. Powder coating is the process that can make all those things brand new, while also protecting them for years.
Here in New Jersey, that’s exactly what we do at Rusty Lions. With more than 20 years in powder coating, sandblasting, and metal finishing, we’ve seen how the right coating can turn a worn-out piece of metal into something that looks like it just rolled off the showroom floor.
What is Powder Coating?
At its core, powder coating is a finishing process - but it’s not paint. Instead of liquid, we use a dry powder made up of pigments and resins. That powder is sprayed onto metal using static electricity, which makes it stick like a magnet.
Once it’s applied, the piece goes into a curing oven. The heat melts the powder, which flows into a smooth, even surface. When it cools, you’re left with a hard, protective finish that won’t chip or peel the way paint does.
It’s thick. It’s strong. And it’s built to last.
The Benefits of Powder Coating Over Liquid Paint
Now, paint has its place - but if you want a finish that lasts, powder coating is the way to go.
-
Durability
It’s harder to scratch or chip.
-
Thickness
Powder lays down a heavier layer in one shot.
-
Eco-friendly
No solvents, no fumes.
-
Appearance
Glossy, matte, textured, metallic…. endless choices.
-
Lifespan
Paint fades or peels in a few years. Powder coating? 15-20 years.
The Step-by-Step Process
It sounds simple on paper, but the prep and technique make all the difference. That’s where 20+ years of experience show. When you trust us with your project, here’s how it goes:
-
1. Prep Work
We clean the metal in this first step, which usually involves sandblasting to remove rust, dirt, or old coatings.
-
2. Powder Application
The powder is applied using an electrostatic gun. Our operators ensure even coverage.
-
3. Curing
The part is then baked, or cured, in a high-temperature oven. The high heat bonds the powder permanently.
-
4. Cool Down & Inspection
The part is then allowed to cool down. We then inspect every detail thoroughly before it leaves the shop.
Where to Find the Best Powder Coating in New Jersey?
Plenty of shops advertise powder coating. The problem? Not every shop does it right. If prep work is rushed, if cheap powders are used, or if curing isn’t done properly, the coating won’t last. That’s when you see peeling, chipping, or uneven color.
At Rusty Lions, we do it immaculately every day. Automotive rims, gates, machinery, outdoor furniture, custom projects - we’ve coated them all. And we don’t just stop at powder coating. With sandblasting, cerakote, and other finishes, we’re set up to handle metal start to finish.
So if you’re in NJ and you’ve been Googling ‘the best powder coating near me’ - that’s us.
The Cost of Powder Coating
Let’s talk money for a moment, because that’s usually the first thing people have on their mind after durability. Powder coating isn’t always the cheapest option up front, but it’s one of those investments that saves you down the line. Why? Because you’re not repainting every few years, you’re not replacing rusted-out furniture, and you’re not constantly maintaining surfaces.
On average, small parts like brackets, handles, or car accessories might cost a modest amount per piece. Larger items - wheels, gates, or machinery - naturally run higher. Compared to paint, the initial bill might make you pause, but the lifespan and durability more than make up for it. Think of it as paying once instead of paying over and over again.
Factors Affecting Price
Now, no two powder coating jobs are identical. The price can shift depending on several things:
-
Size of the Item
A set of small bolts will cost far less than a heavy-duty gate or a full set of rims.
-
Prep Work
If the metal is rusty, dirty, or covered in old paint, we’ll need extra time for sandblasting.
-
Type of Powder
Standard finishes are affordable, but specialty powders (metallics, textures, high-temp resistance) add to the cost.
-
Quantity
Coating a single piece is costlier. A batch of identical parts can bring the per-piece cost down.
-
Turnaround Time
Rush jobs are possible, but they can affect pricing since the shop has to rearrange scheduling.
Why Choose Rusty Lions?
Here’s why our customers keep coming back:
-
Two Decades of Experience
Not just in powder coating but in prepping and resurfacing metal.
-
Options
From colors to textures, there’s plenty to choose from.
-
Quality Materials
Powder, equipment, and everything else high-quality - guaranteed.
-
Durability
Our coatings are aesthetic as well as designed to last.
-
Customer-first
100% transparency in every step. This means clear timelines and delivering what we promised.
How Long Does Powder Coating Last?
One of the main reasons why people choose powder coating is the lifespan. A proper job can last 15-20 years, sometimes longer if the item is kept indoors. Outdoor pieces - exposed to UV rays, salt air, and rain - will wear faster but still outlive paint by a long shot.
It’s a one-time investment that pays for itself over time.
Maintenance Made Easy
The best part about powder coating? It barely needs upkeep. No yearly painting, no sealing, no endless touch-ups.
- Wash occasionally with mild soap and water.
- Skip the harsh cleaners and abrasives.
- Keep an eye out for chips, especially on outdoor pieces.
And that’s all. Easy care for a finish that holds up year after year.
Trust Rusty Lions for Premium Powder Coating Services in NJ
So, who does powder coating near me? If you’re in New Jersey, the answer is simple - Rusty Lions. We’ve been helping people protect, refinish, and transform their metal for over two decades. Whether it’s rims, gates, machinery, or that old patio set in your backyard, we can bring it to life.
Give us a call today. We’ll give your metal the durable finish it deserves.
Frequently Asked Questions
Automotive components, railings, furniture, machinery, gates, and custom projects.
15-20 years with proper prep and care.
Upfront, yes. But because it lasts for longer, it’s usually cheaper in the long run.
Not directly. The rust needs to be removed first - that’s why sandblasting is such an important step.
Some projects are done in a few days while others may take a few weeks, depending on the size and complexity of the job.
