Got an old set of rims sitting in the garage? Maybe you have some faded patio chairs in the backyard, or you just finished welding up some custom parts for a weekend project.
You are probably looking at that bare metal right now and wondering what the best move is. You want it to look great, sure, but you also need a finish that will actually hold up over time. Nobody wants to spend their weekend painting something just to watch it flake off a few months later.
People ask us all the time at the shop if they can put a tough, lasting finish on this specific metal. The short answer is yes. In fact, powder coating aluminum is pretty much the best way to get the job done and make sure your parts look awesome for years. Let’s talk about how we do it here at our shop, why it works so well, and why it beats out regular paint every single time.
How Aluminum Actually Handles the Weather
To really get why this process makes sense, we have to talk about how the metal itself handles the real world. A lot of folks think that because it isn't made of steel or iron, it simply won't rust. And that is partly true; you are never going to see that chunky, red rust that eats through old truck fenders. But let's be real, the metal is definitely not bulletproof.
Instead of rusting, it oxidizes. When bare metal sits outside in the moisture and oxygen, it starts to grow this dull, chalky white film all over the surface. Over time, that chalky stuff actually eats into the metal and causes pitting.
If you live anywhere near the coast where the air is full of salt, or up north where the winter roads are covered in road salt, leaving your parts bare is a bad idea. The weather will chew up the metal way faster than you might think.
You need a rock-solid shield between your parts and the elements, and you need something that can take a beating from everyday use.
How the Magic Happens: The Process
If you have never hung around the shop to see us do this, it looks pretty wild. We don't use wet paint. There are no messy liquid solvents, and you don't have to wait days for coats to dry in the air. Instead, we use a completely dry process.
The material we use comes in a box and feels a whole lot like colored baby powder. We spray this dry dust through a specialized gun. Here is where the science comes in: the gun actually shoots a high-voltage electrical charge into the powder as it sprays out. At the same time, we attach a ground wire to the metal part we are working on.
Because opposites attract, the charged powder acts like a magnet. It pulls right to the grounded metal part. It wraps around the back edges, sneaks into the tight little corners, and lays down a perfectly even layer. You don't get any of the drips, runs, or thin spots you always seem to get with a rattle can. The static electricity just holds the powder right there on the metal.
Once the part is totally covered in the color you picked, we roll it into a giant industrial oven. We usually crank the heat up to around 400 degrees. When the metal gets hot, that dry powder melts into a smooth liquid. It flows together and chemically changes, baking into a super tough plastic shell that grabs onto the metal and doesn't let go.
Why Prep Work Makes or Breaks the Job
Any guy who has been doing this for a living will tell you the same thing: a good finish is 90 percent prep work. You can't just spray powder over dirty, greasy metal, throw it in the oven, and hope for a miracle. Doing proper aluminum powder coating takes a lot of dirty, careful prep work before we even touch the spray gun. If a shop gets lazy and skips steps here, your finish will start peeling and bubbling down the road.
Here is how we get the metal ready before it goes in the booth:
- Stripping off the old junk: First, we have to get rid of every bit of old paint, heavy grease, and dirt. We use strong chemical strippers and sometimes run the parts through a high-heat burn-off oven. If there is even a drop of oil left on the metal, the powder won't stick to that spot.
- Sandblasting for a tight grip: Next, we put the parts in the blast cabinet. We shoot stuff like crushed glass or sand at high speeds to strip the part all the way down to raw, bare metal. This blasts away that chalky oxidation we talked about earlier. It also leaves the metal feeling a little bit like fine sandpaper. We call this giving the metal a "profile." The melted powder needs those tiny scratches to really bite into the surface.
- A good chemical wash: After we blast it, we wash the part down and treat it with a chemical wash. This does two things. It stops any flash rust from trying to start, and it adds an invisible layer that helps the final color stick even better.
- Baking it dry: Finally, we make sure the part is totally bone dry. We can't have a single drop of water hiding in a bolt hole when it goes into the spray booth, or it will ruin the whole job.
Cast vs. Extruded: Yes, It Matters
Not all metal is made the same way. We see two main types come through the doors: cast and extruded. Knowing what we are looking at is a really big deal when it comes time to heat the parts.
Extruded metal is pushed through a die to make a shape. Think of things like window frames, long metal tubes, or custom brackets. This stuff is really dense and smooth. It usually finishes really well and doesn't give us many headaches.
Cast parts are a whole different animal. They make cast parts by pouring melted liquid metal into a sand mold. Think of intake manifolds, engine blocks, or most custom car wheels. Because of how the metal cools down in the mold, it ends up full of tiny air bubbles hidden inside the metal.
If we just spray color onto a cast wheel and put it in a hot oven, those hidden air bubbles will expand from the heat. They will force their way out of the metal and push right through the melting powder. When it cools down, you end up with tiny, ugly holes all over your new finish. To stop this from happening, we do something called "outgassing."
We put the bare, clean part into the oven first, and we heat it up hotter than our final baking temperature. This forces all those hidden gases to push out while the metal is still bare. It takes more time, but it is the only way we can promise a smooth look on cast parts.
Why People Love This Process (The Big Perks)
Why do so many car builders, fabricators, and homeowners love this stuff? The benefits of powder coating aluminum are huge, especially when you line it up next to regular liquid paint.
Here are a few reasons we use this process every day:
- It takes a massive beating: When the powder bakes in the oven, it creates a super tough shield. It fights off chips, heavy scratches, and fading from the sun. If a rock kicks up on the highway and hits a painted rim, the paint usually chips right off. If it hits a coated rim, it usually just bounces off without breaking the color.
- Way too many colors: You aren't stuck with just a handful of basic colors on a shelf. We have thousands of options. We can shoot bright neon, deep sparkling metallics, or a simple flat black.
- Cool textures: We can do a lot more than just flat color. We can shoot wrinkle finishes that look like old-school hot rod parts, or rough textures that feel like grip tape, perfect for truck steps and handles.
- Better for the air we breathe: Regular paint gives off harsh fumes called VOCs that pollute the air while they dry. Our dry powder does not use liquid solvents, so it puts almost zero bad fumes into the air.
- Way less trash in the shop: If you spray too much wet paint, it just floats away and is wasted. With our process, any dry powder that falls to the floor can actually be swept up and used again, which really cuts down on shop waste.
Powder vs. Regular Spray Paint
We hear it from guys all the time: "Why shouldn't I just go buy a few cans of spray paint at the hardware store and do it in my driveway?" You totally can do that, and it is definitely cheaper upfront. But you get what you pay for.
Regular paint just sits right on top of the metal. It dries when the chemicals evaporate, leaving a thin, hard, and brittle layer behind. As the metal gets hot in the summer sun and cold at night, it expands and shrinks. That brittle spray paint can't stretch, so it cracks, flakes, and peels off in big chunks. Plus, the sun will bleach out a spray-painted patio chair in just one summer.
The polymer shell we bake on is different. It flexes and moves with the metal, so it doesn't crack. We also put it on way thicker than spray paint, which gives you real armor against scratches and weather. Paying a shop (like us) to do it right the first time saves you the massive headache of having to sand down and repaint your stuff every single spring.
Easy Maintenance Tips to Keep It Looking New
Once we hand your finished parts back over to you, keeping them clean is actually really easy. Because the baked surface is so slick and smooth, dirt, sticky brake dust, and road grime just don't want to stick to it.
Here are the best ways to keep that fresh look:
- Keep it simple with soap: You do not need to buy heavy-duty degreasers or harsh chemical cleaners. Strong chemicals will just dull the shine over time. All you really need is warm water and a regular, mild car wash soap.
- Grab a soft rag: Always use a clean microfiber towel or a really soft sponge. Keep the rough scrubbing pads in the kitchen; they will scratch the clear coat.
- Wash and rinse it well: Gently wipe the dirt away and then give it a really good rinse with the hose. You want to make sure you get all the soapy water off the part.
- Take a minute to dry it: Wipe it down with a soft cloth so the water doesn't sit there and leave hard water spots all over your fresh color.
- Add some wax: If you went with a high-gloss finish, you can rub on some regular automotive paste wax or spray it with a quick ceramic detailer. It gives the color a great pop and adds a little extra slickness. Just make sure you avoid rubbing compounds that have grit in them.
Ready to Transform Your Metal? Call Us Today
Whether you are fixing up a vintage set of wheels for your project car, trying to save a rusty set of garden chairs for the summer, or putting the final touches on a big welding project, you need to protect your hard work. Don't let your money and time go to waste just because of bad weather and cheap paint. We know how much effort you put into your builds, and we are here to help you make them look awesome and last a really long time.
Our crew at Rusty Lions has the big ovens, the right spray gear, and the actual hands-on experience to do the job right the very first time.
We handle every single step right here in our shop. We do the messy stripping, the heavy sandblasting, the chemical washing, and the final bake. Your parts will go home looking way better than the day they were built.
Give us a shout today to talk about what you are working on. We can figure out the right color, get you a fair price, and show you what a real professional finish looks like. Come by the shop at https://rustylions.com/, drop off your gear, and let's get your metal looking great. We are in the shop and ready to work when you are.
